Icp Boring/Countersinking, Y Axis" Unit - HEIDENHAIN MANUALPLUS 620 User Manual

"ICP boring/countersinking, Y axis" unit

The unit machines a single hole or a hole pattern in the XY or YZ plane.
Using ICP, you define the hole positions as well as further details for
boring or countersinking.
Unit name: G72_ICP_Y / Cycle: G72 (see page 295)
Parameters on the Pattern form
FK see page 48
APP Approach: see page 51
DEP Departure: see page 51
Parameters on the Cycle form
E Delay (dwell time at end of hole) (default: 0)
D Retraction at
0: Rapid traverse
1: Feed rate
RB Return plane (default: return to the starting position or to
the safety clearance)
Further forms: see page 46
146
Access to the technology database:
Machining mode: Drilling
Affected parameters: F, S
smart.Turn Units for the Y Axis