Linear Slot On Front/Rear Face G301-Geo; Circular Slot On Front/Rear Face G302/G303-Geo - HEIDENHAIN MANUALPLUS 620 User Manual

Linear slot on front/rear face G301-Geo

G301 defines a linear slot in a contour on the front face/rear face.
Parameters
XK Center in Cartesian coordinates
YK Center in Cartesian coordinates
X Diameter (center point in polar coordinates)
C Angle (center point in polar coordinates)
A Angle to XK axis (default: 0°)
K Slot length
B Slot width
P Depth/height (default: "P" from G308)
P<0: Pocket
P>0: Island

Circular slot on front/rear face G302/G303-Geo

G302/G303 defines a circular slot in a contour on the front face/rear
face.
G302: Circular slot clockwise
G303: Circular slot counterclockwise
Parameters
I Center of curvature in Cartesian coordinates
J Center of curvature in Cartesian coordinates
X Diameter (center point in polar coordinates)
C Angle (center point in polar coordinates)
R Curvature radius (reference: center point path of the slot)
A Starting angle; reference: XK axis (default: 0°)
W Final angle; reference: XK axis (default: 0°)
B Slot width
P Depth/height (default: "P" from G308)
P<0: Pocket
P>0: Island
HEIDENHAIN MANUALplus 620 211