Full Circle On Lateral Surface G314-Geo; Rectangle On Lateral Surface G315-Geo - HEIDENHAIN MANUALPLUS 620 User Manual

Full circle on lateral surface G314-Geo

G314 defines a full circle in a lateral-surface contour.
Parameters
Z Center
CY Center as linear value; reference: unrolled reference diameter
C Center (angle)
R Radius
P Pocket depth (default: "P" from G308)

Rectangle on lateral surface G315-Geo

G315 defines a rectangle in a lateral-surface contour.
Parameters
Z Center
CY Center as linear value; reference: unrolled reference diameter
C Center (angle)
A Angle to Z axis (default: 0°)
K Length
B Width
R Chamfer/rounding arc (default: 0°)
R>0: Radius of rounding arc
R<0: Chamfer width
P Pocket depth (default: "P" from G308)
HEIDENHAIN MANUALplus 620 221