Specifications - Lexicon MPX 200 - REV 2 Manual

Appendix
Audio Inputs (2)
Level -30dBu to +4dBu
Impedance 500K unbalanced for
direct instrument input
(unit detects a mono
input on the right
input)
1/4" connectors
Audio Outputs (2)
Level +8dBu typical
Impedance 75 Ohms for
headphone output
(right only used for
mono output; left only
used for stereo
headphones)
1/4" connectors
Digital Audio Output
24-bit digital S/PDIF output (always active)
Sample Rate 44.1kHz
Connector Coaxial, RCA type
A-2

SPECIFICATIONS

Digital Audio Input
Digital S/PDIF input
Sample Rate Supports 44.1kHz only
Connector Coaxial, RCA type
Footswitch
Tip/Ring/Sleeve phone jack for Bypass and
Tap (optional)
Frequency Response
Wet/Dry 20Hz-20kHz, ±1dB
THD+N
<0.05%, 20Hz-20kHz
Dynamic Range
A/A >95dB typical,20Hz-
20kHz, unweighted
A/D >100dB typical, 20Hz-
20kHz, unweighted
D/A >100dB typical, 20Hz-
20kHz, unweighted
Conversion
A/D, D/A 24-bits
Sample Rate 44.1kHz
Specifications are subject to change without notice.
Crosstalk
>55dB
Internal Audio Data Path
DSP 24-bit
Power Requirements
100-120/220-240V~
50 - 60Hz, 25W
Dimensions
Width 19 inches (483mm)
Height 1.75 inches (45mm)
Depth 5.5 inches (140mm)
Weight
Unit 3.15 pounds (1.41 kg)
Environment
Operating 32 to 104°F (0 to 40°C)
Temperature
Relative 95% non-condensing
Humidity
Lexicon