Section 2: Basic Operation; The Adjust Knob; Selecting And Loading Programs - Lexicon MPX 200 - REV 2 Manual

Basic Operation

THE ADJUST KNOB

The Adjust knob (pictured below) is located on the right
side of the front panel and performs multiple functions.
For example:
A. When the Load button is pressed,
the Adjust knob is used to select
programs.
B. When the Edit button is pressed,
the Adjust knob is used to control
one of the Edit functions.
To reassign the Adjust knob for selecting programs, press
the Load button. Other functions are described
throughout this user guide.
2-2

SELECTING AND LOADING PROGRAMS

The MPX 200 contains 240 presets and storage for 64
user programs. To select a preset or user program as the
running program:
1. Press the Load button. (Skip this step if the
unit is already in Program Load Mode.)
2. Turn the Adjust knob until the desired program
number appears on the display, or effects and
routing are indicated by the EFFECTS and ROUTING
(DUAL) LEDs.
3. Press Load again to load the selected program. The
program can also be set to load automatically (see
Auto Load on pages 3-3 and 3-6).
The number of the loaded program is displayed
on the three-digit display. The LEDs for the
selected program will light to indicate which
effects the selected program contains. If the
selected program contains a dual effect, the appropriate
ROUTING (DUAL) LED will light.
Lexicon