Lexicon MPX 200 - REV 2 Manual page 39

MPX 200
5. Bypass Mode
Sets the function of Bypass. When set to Dry, the unit
sends only dry, unprocessed audio to the outputs.
When set to full mute (Qui), the unit mutes the
outputs. When set to input mute (Inp), the unit
mutes the inputs only. Running effects will continue
their natural decay.
6. Program Load
Controls the processing of incoming audio signals
during program load. When set to mute (Qui), the
unit mutes during program load. When set to bypass
(Dry), the unit sends only dry, unprocessed audio to
the outputs.
7. Global Tempo Mode (Tap)
Controls the tempo setting that is applied when a
new program is loaded. A tempo setting is stored
with each program. When Global Tempo Mode is set
to Program (Pro), the unit applies the stored tempo
setting of each program as it is loaded. When set to
Global (Glo), the unit applies the current tempo
setting to each program as it is loaded.
(Dry, Qui, Inp) 8. Global Compressor Mode
Controls the compression settings that are applied
when a new program is loaded. Compression
settings are stored with each program. When Global
Compressor Mode is set to Program (Pro), the unit
applies the stored setting of each program as it is
loaded. When set to Global (Glo), the unit applies
the current compression setting to each program as
it is loaded.
(Dry, Qui)
Note:
The Program (Pro) setting for Global Compressor
Mode does not take effect until a new program is
selected.
(Glo, Pro)
9. Patching
Enables and disables Learned Patches. When set to
On, the unit responds to Learned Patches. When set
to Off, the unit ignores Learned Patches, preventing
accidental changes.
System Mode
(Glo, Pro)
(On, Off)
3-5