Lexicon MPX 200 - REV 2 Manual page 46

Program Descriptions
GATE
Gated reverbs were originally created by feeding a
reverb, such as a metal plate, through an analog gate
device. The decay time was set to instant, and the hold
time varied the duration of the sound.
The Gate programs provide a fairly constant sound with
no decay until the reverb is cut off abruptly. These
programs work well on percussion - particularly on snare
and toms - but it is recommended to experiment with
other sound sources as well.
Note:
When Time is altered with the Adjust knob, the
effect is re-loaded, causing audio to briefly mute or
bypass to dry audio, depending on the setting of
the System Mode Parameter Program Load (see
page 3-5).
4-4
Gate Presets
10 StraightGate
11 Slope Down
12 Drum Gate
13 140ms TapPre
14 240ms TapPre
15 340ms TapPre
16 440ms TapPre
17 540ms TapPre
18 Inverse
19 Dark Inverse
* (1/32 Note)
Lexicon
Adjust Tap
Time –
Time –
Slope Pre-Delay *
Slope Pre-Delay *
Slope Pre-Delay *
Slope Pre-Delay *
Slope Pre-Delay *
Slope Pre-Delay *
Time –
Time –