Lexicon MPX 200 - REV 2 Manual page 40

System Mode
10. MIDI Channel
Selects the MIDI Channel for MPX 200 messages.
When set to Off, the unit ignores messages sent on
all MIDI channels. When set within a range of 1 to
16, the unit responds to messages sent on the
selected MIDI channel. When set to All, the unit
responds to messages sent on all MIDI channels.
11. MIDI Program Change
Enables and disables
messages. When set to On, the unit responds to
MIDI Program Change messages. When set to Off,
the unit ignores MIDI Program Change messages,
preventing accidental changes.
12. MIDI Clock Receive
Enables and disables MIDI Clock messages. When set
to On, Tap Tempo is changed by incoming MIDI
messages. When set to Off, the unit ignores MIDI
Clock messages, preventing accidental changes.
3-6
(Off, 1 to 16, All)
(On, Off)
MIDI Program Change
(On, Off)
13. MIDI OUT/THRU
Controls the function of the MIDI OUT/THRU
connector. When set to Thru (Thr), the unit can
forward - but cannot generate or modify - MIDI
messages. When set to Out, the unit can generate its
own MIDI Dumps.
Note:
MIDI dumps can only be performed when the
System Mode parameter MIDI OUT/THRU is set to
Out.
14. Auto Load
Determines whether the front panel Load button
must be pressed to load selected programs. When
set to On, programs will automatically load 3/4
second after the Adjust knob stops turning. When set
to Off, programs will not load until the Load button
is pressed.
Lexicon
(Thr, Out)
(On, Off)