HP P4518A - Traffic Management Server Sa7150 User Manual page 142

C H A P T E R 7
NOTE: The Encryption
Status Change alarm
(ESC) does not display
extended data.
132
HP e-Commerce/XML Server Accelerator SA7150 User Guide
Refused SSL connections
•
Utilization (Threshold) alarms
•
Overload alarms
•
Network Link Status
•
All alarms are disabled by default and may be enabled in any
combination.
Alarm format:
A:mm/dd/yyyy hh:mm:ss:
ALARM_CODE:MODIFIER:EXTENDED_DATA:/
*message*/
Where:
A: Identifies the message as an alarm (as
opposed to a monitor report).
mm/dd/yyyy hh:mm:ss: The timestamp.
ALARM_CODE: The alarm type: [ESC RSC UTL OVL
NLS].
MODIFIER: The alarm modifier, a code
identifying the event that triggered the
alarm.
EXTENDED_DATA: Any additional relevant data.
/*message*/: Human-readable text description
of the alarm.
The CLI commands for alarm configuration are:
Command
set alarms
show alarms
For example:
HP SA7150> set alarms all
HP SA7150> show alarms
Alarms set: esc rsc utl ovl nls
HP SA7150> set alarms none
HP SA7150> show alarms
Alarms set:
Parameters
all, esc, rsc, utl, ovl, nls none
Default