HP P4518A - Traffic Management Server Sa7150 User Manual page 111

C H A P T E R 5
Command
show rsc_window
set utl_window
set utl_highwater
Command Reference
Description
Display current Refused SSL Connections Alarm interval.
Syntax:
HP SA7150>
show rsc_window
Check for refused SSL connections [secs]: 10
Set interval (window) at which the device checks for exceeded
utilization thresholds (CPU load, Connections per Second, or Total
Open Connections and, if any are detected, issues a Utilization
Threshold Alarm. (Range: 5-65000 seconds, default: 15)
NOTE: The data collected for utilization threshold metrics tends
to be bursty, so a smoothing algorithm is used to prevent
continuous alarms. The utilization window is a user-specified
sliding interval during which data is collected and averaged.
Consequently, shorter intervals are likely to result in some
extraneous alarms.
NOTE: See also set utl_highwater and set utl_lowwater, this
section.
Syntax:
HP SA7150>
set utl_window <secs>
where <secs> is the number of seconds of the desired interval.
Set the Utilization Threshold Alarm high-water value. Expressed
as a percentage, the high-water value represents the highest CPU
utilization, Connections per Second, or Total Open Connections
required to trigger a UTL Alarm. (Range: 2-100%, default: 90)
NOTE: See also set utl_window and set utl_lowwater, this section.
Syntax:
HP SA7150>
set utl_highwater <%>
where <%> is the percentage defining the upper threshold of CPU
utilization, Connections per Second, or Total Open Connections
required to trigger a Utilization Threshold Alarm.
101