HP P4518A - Traffic Management Server Sa7150 User Manual page 121

C H A P T E R 5
Command
set prompt
set serial
show serial
exit
Command Reference
Description
Change the prompt from SA7150 to the desired prompt.
Example:
HP SA7150> set prompt
Prompt [HP SA7150> ]:
HP SA7150>
Allows user to set the console port to monitor the CLI or the output
logging, and set the speed, data bits, stop bits, and parity bits. The
aux console port is fixed at 115200, 8, 1, N. This command returns
the user to the "password" prompt after setting the console port.
Example:
HP SA7150> set serial
Baud rate (9600/115200) [9600]:
Data bits (7/8) [8]:
Stop bits (1/2) [1]:
Parity (n/e/o) [n]:
Set serial parameters [y]:
Display console serial parameters.
Example:
HP SA7150> show serial
Speed : 9600
Bits : 8
Stop Bits : 1
Parity : n
Log the user out of the CLI. If the current configuration has
changed, the user is allowed to save the current configuration as
the active configuration.
Example:
HP SA7150> exit
Exiting CLI...
.
.
.
password:
111