Centralized Management Console version 9.0.01.0098 (updated) For the latest HP P4800 G2 SAN Solution for BladeSystem documentation, browse to http:// www.hp.com/support/manuals. In the Storage section, select Disk Storage Systems and then HP StorageWorks P4000 G2 SAN Solutions. Update recommendation Routine Supersedes 9.0.00.3561...
Page 4
Software with patch 10060-00 fails a network interface configuration from the non-English CMC When the P4000 SAN/iQ software version 9.0 CMC is used in a language other than English, configuring or re-configuring the network interface might result in a failed operation with the error...
Page 5
Press Enter on the confirmation window. A window opens listing the assigned IP address. Open the CMC and locate the storage system using the Find function. See the HP P4000 SAN Solution user guide for further information regarding use of the Configur- ation Interface.
HP P4800 and other HP P4000 storage systems HP recommends not mixing HP P4800 G2 storage systems with other HP P4000 series systems in a cluster. The capacity of the smallest system will limit the capacity used on all systems, meaning that the larger capacity of the HP P4800 G2 SAN Solution for BladeSystem will be unused.
Page 7
Product model names and numbers Technical support registration number (if applicable) Product serial numbers Error messages Operating system type and revision level Detailed questions HP P4800 G2 SAN Solution for BladeSystem SAN/iQ Software Release Notes...