HP P4518A - Traffic Management Server Sa7150 User Manual page 112

C H A P T E R 5
Command
set utl_lowwater
show utl_window
show utl_highwater
show utl_lowwater
set ovl_window
102
HP e-Commerce/XML Server Accelerator SA7150 User Guide
Description
Set the Utilization Threshold Alarm low-water value. Expressed as
a percentage, the low-water value represents the lowest CPU
utilization, Connections per Second, or Total Open Connections
required to trigger a UTL Alarm. (Range: 1-99%, default: 60%)
NOTE: See also set utl_window and set utl_highwater, this
section.
Syntax:
HP SA7150>
set utl_lowwater <%>
where <%> is the percentage defining the lower threshold of CPU
utilization, Connections per Second, or Total Open Connections
required to trigger a Utilization Threshold Alarm.
Display the current Utilization Threshold Alarm window.
Example:
HP SA7150>
show utl_window
Utilization Window set [secs]: 10.
Display the Utilization Threshold Alarm's current upper threshold.
Example:
HP SA7150>
show utl_highwater
Utilization High water mark [%]: 80
Display the Utilization Threshold Alarm's current lower threshold.
Example:
HP SA7150>
show utl_lowwater
Utilization Low water mark [%]: 60
Set interval (window) at which the device checks for overloads
resulting in the device executing a spill or throttle and, if any are
detected, issues an Overload Alarm. (Range: 5-65000, default: 15)
Example:
HP SA7150>
set ovl_window 10