C H A P T E R 5
Command
config compare
config reset
config default
config save
Command Reference
Description
Display differences between saved and current configuration. For
optimal flexibility in configuration and testing, the SA7150
supports both "current" (volatile) and "saved" (non-volatile)
configurations. The config compare command displays the
differences, if any, between the two configurations.
Example:
HP SA7150> config compare
Only in /keys: 4
HP SA7150>
Restore saved configuration.
WARNING: Executing this command causes the system to reboot.
Example:
HP SA7150> config reset
Reverting to saved configuration.
Reset (y/n) [n]: n
HP SA7150>
Clears current and saved configurations and restores factory
defaults.
WARNING: Executing this command causes the system to reboot.
Example:
HP SA7150> config default
Reset to factory default configuration [n]: y
Reset to factory defaults
System rebooting...done
Save the current configuration to the flash (non-volatile) memory.
Example:
HP SA7150> config save
Saving configuration to flash...
Configuration saved to flash
HP SA7150>
105