Advertisement
Knowing your Router
8.
ADSL SYNC LED
The ADSL LED flashes light during negotiation with your ISP. It
stays light when the Modem is connected properly to your ADSL
service.
Off - No ADSL connection
On - Blinking negotiating connection/no ADSL Sync
On - ADSL link is up and connected
9.
Power LED
When you apply power to the Modem or restart it, a short period
of time elapses while the Modem boots up. When the Modem has
completely booted up, the power LED becomes a SOLID light,
indicating the Modem is ready for use.
Off Modem is off
On Modem is on
Back Panel
Broadband Voice Modem/Router - 1 Port Part # F1PI210ENau
Broadband Voice Modem/Router - 4 Port Part # F1PI241ENau
Broadband Voice Modem with Wireless Router - 4 port Part # F1PI241EGau
1.
ADSL Line
This port is for connection to your ADSL line. Connect your ADSL
line to this port.
2.
LAN Ports
The Ethernet port is RJ45, 10/100 auto-negotiation. Connect your
network-enabled computers or any networking devices to this
port.
10
Knowing your Router
3.
Power Switch
Standard power switch used to turn the VOIP Router on and off.
4.
Power Plug
Connect the included 12V 1A DC power supply to this inlet.
Using the wrong type of power adapter may cause damage to
your Modem.
5.
Reset Button
The "Reset" button is used in rare cases when the Modem
may function improperly. Resetting the Modem will restore the
Modem's normal operation while maintaining the programmed
settings. You can also restore the factory default settings by using
the Reset button. Use the restore option in instances where you
may have forgotten your custom password.
a. Resetting the Modem
Push and hold the Reset button for one second then release it.
When the PWR light becomes solid again the reset is com-
plete.
b. Restoring the Factory Defaults
Push and hold the Reset button for twenty seconds then
release it. When the PWR light becomes solid again the restore
is complete.
6.
Phone Port
Phone Ports connect to standard analogue telephone set or fax
machine.
7.
PSTN Failover Port
The Optional RJ-11 port is for connection to your PSTN (Home
Phone) line to provide normal phone call backup for when VOIP is
unavailable or not required.
11
11
1
2
3
4
5
6
7
Advertisement
