Advertisement
Advanced Setup Method
Channels 1, 6, and 11, as the three non-overlapping channels in
the 2.4GHz range, are preferred. The available channel settings are
limited by local regulations. (Default Range: 1-13)
Access Control
Using the Access Control functionality, you can specify which PCs
can wirelessly connect to the access point. Each PC has a unique
identifier known as a Medium Access Control (MAC) address. With
MAC filtering enabled, only the computers whose MAC address you
have listed in the filtering table may connect to the VoIP Router.
See the description of the Access Control features below.
Parameter Description
Enable MAC Filtering: Enable or disable the MAC filtering function.
Access Rule for registered MAC address: When MAC filtering is
enabled, all registered MAC addresses are controlled by this Access
Rule.
MAC Filtering Table: Enter the MAC addresses of the network card
you wish to allow or deny connection. (Up to 32 stations)
38
Advanced Setup Method
Security
It is important to be aware of security issues, especially when using
wireless. You can configure your security settings on this page. Do
not change settings if are not sure what they are for, default settings
are normally fine.
If you are transmitting sensitive data across radio channels, you
should enable wireless security.
For a more secure network, the VoIP Router can implement one or a
combination of the following security mechanisms:
•
Disabled
•
WEP Only
•
WPA and/or WPA2
•
WPA and 802.1x *
* Using 802.1x security requires support to do so from your OS or
other third party radius server software, and is not recommended
unless you are familiar with setting up such systems.
39
39
1
2
3
4
5
6
7
Advertisement
