Advertisement
Advanced Setup Method
Reset
Perform a reset from this page.
Should your unit become unresponsive for any reason, you can simply
perform a reset from this page. Performing a reset will reboot the
device. Your configuration settings will remain the same.
Status
The Status screen displays WAN/LAN connection status, firmware and
hardware version numbers, as well as information on DHCP clients
connected to your network.
82
Advanced Setup Method
The security log may be saved to a file by clicking "Save" and
choosing a location.
The following items are included on the Status screen:
Parameter Description
Internet: Displays WAN connection type and status. Release Click on
this button to disconnect from the WAN. Renew Click on this button
to establish a connection to the WAN.
Gateway: Displays system IP settings, as well as DHCP Server and
Firewall status.
Information: Displays the number of attached clients, the firmware
versions, the physical MAC address for each media interface and for
the VoIP Router, as well as the hardware version and serial number.
ATM PVC: Displays ATM connection type and status.
Save: Click on this button to save the security log file.
Clear: Click on this button to delete the access log.
Refresh: Click on this button to refresh the screen.
83
83
1
2
3
4
5
6
7
Advertisement
