Advertisement
Advanced Setup Method
Description:
Detail description of the VLAN.
IP Address:
IP address of the VLAN virtual interface on the gateway.
Subnet Mask:
Subnet mask of the VLAN virtual interface.
NAT Domain:
NAT addressing domain to define the NAPT operation of the VLAN
virtual interface. Public means that this VLAN will be visible to the
Internet. Private means NAT is enabled to protect the subnet from
visibility to the Internet.
IGMP Snooping:
Enable/disable the feature to block unnecessary IP multicast
traffic flooding among VLAN ports without the specific multicast
membership. This feature is working based on snooping IGMP
Join/Leave messages among the VLAN ports to update the bridging
forwarding database. IGMP Snooping is extremely useful in saving
bandwidth of low-speed interfaces (ex. WLAN) to improve the network
utilization.
34
Advanced Setup Method
IGMP Querier:
Enable/disable IGMP querying to the VLAN virtual interface. The
option is to control whether to behave as an IGMP querier on the
VLAN bridging network. If IGMP Querier option is disabled, the router
will act as an IP multicast compliant host and send IGMP reports for
its own joined IP multicast groups. No IGMP query messages will be
sent to the specific VLAN.
VLAN Access Control:
In this table you can enable or disable the communication between
the VLAN bindings by ticking (enable) or un-ticking (disable) the
corresponding name in the table.
DHCP Client List
The DHCP Clients List displays the IP Address, Host Name and MAC
Address of each client that has requested an IP address since the
last reboot of the Router. Check the FIX box to have the IP address
and the MAC address linked so that the IP address will always be
assigned as it is on this screen.
35
35
1
2
3
4
5
6
7
Advertisement
