Advertisement
Appendices
1.
Double-click Internet Protocol (TCP/IP).
2.
If "Obtain an IP address automatically" and "Obtain DNS server
address automatically" are already selected, your computer is
already configured for DHCP. If not, select these options and then
click ok and then ok again, or click Cancel to close each window.
86
Appendices
Manual IP Configuration
1.
Follow steps 1-4 in "DHCP IP Configuration" on the previous
page.
2.
Select "Use the following IP address." Enter an IP address based
on the default network
10.1.1.x (where x is between 2 and 254), use
255.255.255.0 for the subnet mask and the IP address of the
VoIP Router 10.1.1.1 for the Default gateway field.
3.
Select "Use the following DNS server addresses."
4.
Enter the IP address for the VoIP Router in the Preferred DNS
server field. This automatically relays DNS requests to the DNS
server(s) provided by your ISP. also, add a specific DNS server of
your ISP into the Alternate DNS Server field and click OK to close
the dialog boxes.
5.
Record the configured information in the following table.
TCP/IP Configuration Setting
IP Address
____.____.____.____
Subnet Mask
____.____.____.____
Default Gateway
____.____.____.____
Preferred DNS Server ____.____.____.____
Alternate DNS Server
____.____.____.____
Disable HTTP Proxy
You need to verify that the "HTTP Proxy" feature of your web browser
is disabled. This is so that your browser can view the VoIP Router's
HTML configuration pages.
1.
Open control panel.
2.
Open internet options
3.
Go to the connections tab and click on the LAN settings button.
4.
Ensure that NOTHING is ticked on this screen and click ok.
5.
On the connections tab, make sure that there are no dial up
connections, select the "Never dial a connection" radio button.
87
87
1
2
3
4
5
6
7
Advertisement
