Advertisement
Advanced Setup Method
allow that computer to use remote management. The port field should
be left as the default setting of 8080 unless you need to change it.
After any changes are made you must click on "Save Settings" to
apply them.
Note: If you check "Enabled" and specify an IP address of 0.0.0.0,
any host can manage the VoIP Router.
For remote management via a WAN IP address you need to connect
using port 8080. Simply enter WAN IP address followed by :8080 in
the address field of your web browser, for example, http://212.120.6
8.20:8080. This applies unless you change the port setting, in which
case you need to substitute the 8080 for whatever port you have
assigned.
24
Advanced Setup Method
DNS
Domain Name Servers are used to map a domain name (e.g.
www.somesite.com) to the equivalent numerical IP address (e.g.
64.147.25.20). Your ISP should provide the IP address of one or more
Domain Name Servers. Enter those addresses on this page.
25
25
1
2
3
4
5
6
7
Advertisement
