7
Networking
What's in this chapter
»
Viewing Network Settings
»
Editing Network Settings
»
Securing Your Media Vault from Intruders
Viewing Network Settings
Displays information for how your HP Media Vault connects to the network.
To view network settings
At the computer, click Start, All Programs, HP Media Vault, and
1
then Control Center.
On the Tools tab, click Customize HP Media Vault.
2
You are prompted for an administrator name and password if you set one
up. For additional information, see
Click the Network tab to view settings.
3
The following network settings information displays.
Workgroup name
•
The name of the Windows workgroup that all of your computers belong
to.
Secure HTTP
•
Remote access to shared folders or Webshare on the HP Media Vault is
faster using HTTP. However, some Internet service providers require secure
HTTP. If secure HTTP is enabled on your Media Vault, you must type
HTTPS:\\servername when accessing the Media Vault remotely.
IP Settings, either automatically or manually assigned
•
Automatically assign IP settings (DHCP)
Editing System Settings on page
2-26.
7-87