Type an optional NTP server IP address or name in Time server 2.
Select your Time Zone.
7
Check Automatically adjust daylight savings, if applicable.
8
Click Save.
9
To set the clock manually or from browser
At the computer, click Start, All Programs, HP Media Vault, and
1
then Control Center.
On the Tools tab, click Customize HP Media Vault.
2
You are prompted for an administrator name and password if you set one
up. For additional information, see
On the System tab, click Edit.
3
Click Edit next to Date and Time.
4
Clear the Set Clock from internet time server check box.
5
Enter the Date and Time or click Set time from browser.
6
Select your Time Zone.
7
Check Automatically adjust daylight savings, if applicable.
8
Click Save.
9
Changing Firmware Update Options
You can choose between simple and advanced firmware settings.
When firmware updates are available, go to the simple settings page to
install them directly from the Internet. Use the advanced firmware settings
page to download updates to a network computer and install them to the
Media Vault.
To change firmware update options
At the computer, click Start, All Programs, HP Media Vault, and
1
then Control Center.
On the Tools tab, click Customize HP Media Vault.
2
You are prompted for an administrator name and password if you set one
up. For additional information, see
On the System tab, click Edit.
3
Editing System Settings on page
Editing System Settings on page
2-26.
2-26.
2-29