Drawers; Flash Memory Card; Hard Disk With Adapter; Internal Solutions Port - Lexmark 464de - X B/W Laser User Manual

Drawers

These are possible solutions. Try one or more of the following:
M
AKE SURE THE PAPER IS LOADED CORRECTLY
1
Pull the tray completely out.
2
Check for paper jams or misfeeds.
3
Make sure the guides are aligned against the edges of the paper.
4
Insert the tray.
R
ESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.

Flash memory card

Make sure the flash memory card is securely connected to the printer system board.

Hard disk with adapter

Make sure the hard disk is securely connected to the printer system board.

Internal Solutions Port

If the Lexmark Internal Solutions Port (ISP) does not operate correctly, then these are possible solutions. Try one or
more of the following:
C ISP
HECK THE CONNECTIONS
•
Make sure the ISP is securely attached to the printer system board.
•
Make sure the cable is securely connected to the correct connector.
C
HECK THE CABLE
Make sure you are using the correct cable and that it is securely connected.
M
AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY
For information about installing software for network printing, see the Networking Guide on the Software and
Documentation CD

Memory card

Make sure the memory card is securely connected to the printer system board.
Troubleshooting
280