Menu item
Orientation
Auto
Landscape
Portrait
N-Up Border
None
Solid
Quality menu
Menu item
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both Directions
Toner Darkness
1–10
Enhance Fine Lines
On
Off
Gray Correction
Auto
Off
Description
Specifies the orientation of a multiple-page sheet
Notes:
•
Auto is the factory default setting. The printer chooses between portrait and
landscape.
•
Long Edge uses landscape.
•
Short Edge uses portrait.
Prints a border around each page image
Note: None is the factory default setting.
Description
Specifies the printed output resolution
Note: 600 dpi is the factory default setting. The printer driver default is 1200 IQ.
Enhances the printed quality of small fonts and graphics
Notes:
•
Off is the factory default setting.
•
Fonts applies this setting only to text.
•
Horizontally darkens horizontal lines of text and images.
•
Vertically darkens vertical lines of text and images.
•
Both Directions darkens horizontal and vertical lines on text and images.
Lightens or darkens the printed output
Notes:
•
8 is the factory default setting.
•
Selecting a smaller number can help conserve toner.
Enables a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts
Notes:
•
Off is the factory default setting.
•
To set Enhance Fine Lines using the Embedded Web Server, type the network
printer IP address in a browser window.
Adjusts the gray value of printed output
Note: Auto is the factory default setting.
Understanding printer menus
139