Positioning Books - Konica Minolta bizhub 160 User Manual

3.8 Loading Originals

Positioning Books

When copying an open book or magazine, position the original as detailed below.
1
Raise the Automatic Document Feeder or Original Cover.
2
Place the original face down on
the Original Glass.
Note
Do not place books weighing
more than 4-1/2 lb on the
Original Glass. In addition, do
not press down extremely hard
on the original, otherwise the
machine may be damaged.
3
Position the original on the
Original Glass so that the corner of
the original aligns with the arrow in
the upper-left corner of the
Original Scales.
4
Gently lower the Automatic Document Feeder or Original Cover.
Note
While scanning a thick book or other three-dimensional object with the
Automatic Document Feeder or Original Cover open, do not look directly at
the bright light that may shine through the Original Glass. Although the light
that shines through the Original Glass is bright, it is not a laser beam and,
therefore, is not as dangerous.
5
Specify the desired copy settings.
❍ "Making Copies" on page 4-1
6
Press the [Start] key to start the copy cycle.
bizhub 160
3
3-29