Positioning Highly Transparent Originals - Konica Minolta bizhub 160 User Manual

3

Positioning Highly Transparent Originals

When making a copy from OHP transparencies, translucent paper, or other highly
transparent original, position the original as detailed below.
1
Raise the Automatic Document Feeder or Original Cover.
2
Place the original face down on
the Original Glass.
3
Position the original on the
Original Glass so that the corner of
the original aligns with the arrow in
the upper-left corner of the
Original Scales.
4
Place a blank sheet of paper of the
same size over the original.
5
Gently lower the Automatic Document Feeder or Original Cover.
6
Specify the desired copy settings.
❍
"Making Copies" on page 4-1
7
Press the [Start] key to start the copy cycle.
3-28
3.8 Loading Originals
bizhub 160