Konica Minolta bizhub 160 User Manual page 134

6.10 When Incorrect Copies Are Produced
Symptom
The edge of the copy is dirty.
* If the problem is not corrected even after the operations described above are performed, contact your
service representative.
bizhub 160
Possible Cause
The Original Pad is dirty.
You have selected paper of a
size larger than the original
(when the zoom ratio is full
size).
The original is not placed in the
correct position (when the
zoom ratio is full size).
The reduction ratio selected
does not match the paper size
(when the copy is made at a
manually adjusted reduction
ratio).
Action
Wipe the Original Pad clean
with a soft cloth dampened with
neutral detergent.
Select paper that is the same
size as the document.
Otherwise, enlarge the copy to
the selected paper size.
Select the same paper size as
the original. Or, reload the
paper in the same direction as
the original.
Select a zoom ratio that adjusts
the copy size to the size of the
selected paper. Otherwise,
make a reduced copy with a
zoom ratio that matches the
paper size.
6
6-29