Rhythm Type - DigiTech JAMMAN SOLO Owner's Manual

Rhythm Type

The JamMan Solo has 9 Rhythm guide
®
tracks you can select from. These range
from a simple click metronome to high
quality drum samples as the rhythm guide.
To change the Rhythm Type, follow these
steps:
1. Select a memory location using the
LOOP SELECT buttons.
2. If the memory location is empty
(LOOP and SINGLE LEDs are off),
set a tempo. If the memory location
contains a loop (LOOP or SINGLE
LED is on), press the PEDAL
SWITCh to start playback.
3. Turn up the RhYThM LEvEL knob
to hear the guide track.
4. Press the TEMPO and STORE
buttons simultaneously to enter the
Setup menu.
30
5. Press the TEMPO (NEXT) button
until the RhYThM LED begins
flashing.The DISPLAY will now show
r1 indicating the default Rhythm Type
which is a standard metronome. Turn
up the Rhythm Level if you don't hear
the metronome.
LOOP SELECT buttons to
6. Use the
choose your desired rhythm sound
(designated by
in the DISPLAY). Selecting
the rhythm sound off even if the
Rhythm Level is up.
7. Press the TEMPO (NEXT) button
twice (or tap the PEDAL SWITCh)
to exit the Setup menu.
oF [off], and r1
oF
– r9
turns