Rhythm Type - DigiTech JAMMAN Owner's Manual

Rhythm Type

The JamMan
®
from a simple click metronome to various drum samples as the rhythm guide (a
tempo must be defined and the
the guide track). To change the Rhythm Type, follow these steps:
1. Select a memory location using the
2. If the memory location is empty (
a tempo using the
contains a loop (
oVeRDUb
3. Turn up the
4. Press the
now show r5 indicating the default
5. Use the
(designated by oF (off), and r1 – r9 in the
turns the rhythm sound off even if the
6. The
LooP StoRe
stored if it is to be recalled later. Press the
to store the changes, if desired, or press the
times to exit setup mode.
Rhythm Types are:
oF – Off
r1 – Wood Blocks
r2 – Sticks
r3 – Click
r4 – Alternative Kick / High Hat
56
Delay's guide track has 9 rhythm types to select from. These range
teMPo/StoP
or
LooP
footswitch to start playback.
RHYtHM LeVeL
button until the
SetUP
buttons to choose your desired rhythm sound
SeLect
button will light to indicate this change must be
knob must be turned up to hear
RHYtHM LeVeL
SeLect
and
LooP
footswitch. If the memory location
LED is on), press the
SINgLe
knob to hear the guide track.
RHYtHM
RHYtHM tYPe
RHYtHM LeVeL
r5 – Studio Kick / High Hat
r6 – Techno Kick / High Hat
r7 – Cowbell
r8 – Conga
r9 – Tambourine
buttons.
LEDs are off), set
SINgLe
Rec/PLaY/
LED is lit. The
DISPLaY
.
). Selecting oF
DISPLaY
knob is turned up.
button twice
LooP StoRe
button three
SetUP
will