DigiTech JAMMAN SOLO Owner's Manual page 9

14. Status LED
This LED indicates the status during
record, playback, and overdub:
Solid red:
Solid green:
Solid yellow:
Flashing red/green:
Flashing yellow:
Flashing red:
15. Footswitch Jack
This jack accommodates the FS3X
footswitch for remotely selecting loop
memories, tapping in the loop tempo, and
undo and clear functions.
Record
Play
Overdub
Pedal Tempo
Record Count In
Undo/Redo
Clear
16. Pedal Switch
The Pedal Switch is used to start
recording and toggle between playback
and overdubbing. The Pedal Switch can
also be used for tapping in tempo for a
new phrase as well as undo and redo the
last overdub. Pressing the Pedal Switch
two times quickly stops loop playback.
17. USB Jack
The 5-pin mini-B USB jack provides a
connection to a PC or Mac computer for
transferring loop files to and from the
JamMan Solo using the JamManager
®
Loop Librarian software, downloadable at
www.digitech.com.
18. Tempo Button
This button can be pressed multiple
times to set the tempo for a new loop
TM
5