Ontrol Ne Ection Configuring The Pedalboard; Connecting The Control One - DigiTech 2112 Owner's Manual

C
ONFIGURING THE
The optional Control One foot controller can help you get the most out of your 2112. Since the Control One talks
to the 2112 using a proprietary communication protocol, it offers better response time and capabilities not available
with convention MIDI pedalboard controllers.
The Control One includes 12 footswitches for program and parameter control. It also features a built-in Expression
Pedal. An external expression pedal jack allows you to add a second passive volume pedal for even more real-time
control of your sound.The large 20 character display constantly feeds you important information like Program names
or Tuner indicators.
C C
ONNECTING THE
The Control One uses a standard 5-pin DIN cable (like
those used for MIDI) to communicate with the 2112.
Simply connect the Control One output jack to the 2112
Input jack (when the unit is powered down) and you're
ready to roll!
NOTE: Never plug anything other than a Control One
into the 2112's Foot Controller input jack. (Voltage is
present at this jack).
If you choose to use a second expression pedal with the
Control One foot controller, simply plug a cable from the
pedal's output to the Control One's Ext pedal input.
Voltage Control pedals (such as the DOD FX-17) can
also be used with the Control One.You will need to con-
nect the Control One to the CV Out of the expression
pedal instead of the audio output.
P
EDALBOARD
O
ONTROL NE
E P N
XPRESSION EDAL
With the 2112 being able to accommodate up to 3
Expression pedals, the pedal names change if the Control
One is used.The Names are as follows:
Exp1 = Expression pedal input on the rear of 2112.
When the Control One is not connected
Exp1 = Internal Expression on Control One (When the
Control One is connected)
Exp2 = External Expression pedal insert on Control One
(When the Control One is connected)
Exp3 = Expression pedal insert on the rear of the 2112
(When the Control One is Connected).
AMES
53