DigiTech 2112 Owner's Manual page 12

7) Parameter knobs - Parameter knobs <1> thru <4>
are used to:
• change the gain of the EQ (<1> - <3>) and the mix
between the Wet and Dry signals (<4>) in Program
Mode.The EQ and Mix modes can be set to either
Local or Global modes on Page 1 of the Utilities.
• change the parameters you want to edit in FX Edit
mode.
8) Program/Effect Wheel - Selects Programs (in
Program Mode) or changes effect modules (in FX Edit
Mode).
9) Program Button - Toggles between User and
Factory banks. A successive press will also return the
2112 to Program mode.
10) Solo Button - Toggles the SOLO parameter On/Off.
11) Levels Button - Exits current mode and enters
Levels mode.
12) Assign Button - Initiates the Assign Program func-
tion if Control One is connected and/or allows the
modifier assignments to be made.
13) FX Edit Button - Exits current mode and enters
FX Edit mode. A successive press will also return the
2112 to Program mode.
14) Store Button - Initiates Store function, indicates
changed status.
15) Utility Button - Exits current mode and enters
Utilities mode. A successive press will also return
the 2112 to Program mode.
16) Bypass Button - Toggles Bypass status (On/Off).
17-23) FX Library Buttons:
17) [PreAmp] - Exits current mode and enters FX
edit mode at the Preamp module. A second press
enters the FX Edit mode and selects the first mod-
ule of the PreAmp section. Successive presses
move to the next available module in the PreAmp
section.
18) [Mod] - Exits current mode, enters FX Edit mode
and selects the first available Modulation module.
Successive presses move to the next available
Modulation module.
19) [Pch] - Exits current mode, enters FX Edit mode
4
and selects the first available PitchShift or Detune
module. Successive presses move to the next avail-
able PitchShift or Detune module.
20) [Dly/Rvb] - Exits current mode, enters FX Edit
mode and selects the first available Delay or
Reverb module. Successive presses move to the
next available Delay or Reverb module
21) [Other] - Exits current mode, enters FX Edit
mode and selects the first available Digital Effect
Modules not included in above selections.
Successive presses move to the next available
Digital Effect Module until finally reaching the
Master Mix Module.
22) [TapIt] -The TapIt button is used to set the delay
tap tempo for precise delay time taps.To use the
TapIt button, simply press the TapIt button at the
desired tempo and the delay module will automati-
cally recalibrate the delay taps.
23) [Tuner] - Exits current mode and enters Tuner
mode.
24) Power Switch - Turns the unit on and off.