Table of Contents
Advertisement
Dial Monitor
Digital Trim Position display (T1-T8, CD)
The Dial Monitor displays the current position
and the operation step amount of each Digital Trim.
The trim step can be set directly on the dial monitor
menu.
VR and slide lever position display (LD, RD,
L1-L3)
Displays the current position (black ) and last
operating position (green ) of the VRs and slider
levers.
Knob and Lever Position display
(LD, RD, LS, L1-L3)
The Dial Monitor displays the current position
and last operation position of each knob and lever.
Although neither knob nor lever can hold the last
operation position because of they are "analog"
type, the position data during the last operation is
memorized in the model memory. By moving the
knob and lever to the position displayed on this
monitor, the last operation position is recalled.
Recalling Dial Position
(LD, RD, LS, L1-L3)
The dial position data at the last operation is
displayed for each knob and lever in this monitor.
(Green arrow)
<Linkage Menu>
71
Advertisement
Table of Contents
