Table of Contents
Advertisement
in the aileron mode. When the aileron stick
is manipulated, the ailerons and camber flaps
perform aileron operation simultaneously and
the operation characteristic of the roll axis is
improved.
*The display screen is an example. The actual screen depends on the
model type.
(For more information, see the description at the back
of this manual.)
the switch to call the <Switch> screen, and then
(For a description of the switch selection method,
see the description at the back of this manual.)
and adjust the mixing rate with the adjustment
buttons.
*When the mixing direction is reversed by the linkage,
adjustments can be made by changing the mixing rate
polarity.
or more
servo
FLP 1
(Camber Flap)
AIL1
(Main Aileron)
AIL 3
(Chip Aileron)
(For a description of the curve setting method, see the
description at the back of this manual.)
(For a description of the mixing curve setting
method, see the description at the back of this
manual.)
<Model Menu (Airplane/Glider Functions)>
FLP 2
(Camber Flap)
AIL 2
(Main Aileron)
AIL 4
(Chip Aileron)
a d j u s t m e n t a t
85
Advertisement
Table of Contents
