Features - FUTABA 3PDF Instruction Manual

3PDF
Prior to operation

Features

-Multiple Model Memory (3 Models)
A model name can be assigned each memory using six alphabetic,
numeric and symbolic characters. (P30)
Digital Trim Memory will recall all trim settings. As you go from
model to model memory all trim settings will not have to be reset.
-Large LCD Display
All program information is displayed on a 8 character 2 line dis-
play. The large display is easy to read.
-The third channel can be used to match your
application in specialty models.
The third channel can be used in five operation modes.(P32)
-Digital Trim
Digital trim will allow positive and quick settings to be made.
-Lever Function Selection (P31)
This function applies to D/R, ATL and 3rd channel levers.. Since
they are digital, when you change the model memory these will not
require you to readjust the settings . They will be where they were
the last time that model memory was used.
-New Lightweight and Balanced Design
-Trigger Brake Stop (Mechanical ATL) (P8)
-Body Rest can be used (Option)
-Servo Reverse Function (P22) / Steering
ATV Function (P23) / Steering D/R function
(P25) / Throttle ATV Function (P24) / Throttle
ATL Function (P26)