Throttle Atl - FUTABA 3PDF Instruction Manual

(Description when ATL is assigned to GDB)
This function is used to adjust the brakes. If you are
getting to much brake in the car set the ATL number
to lower setting. When you need more brakes set the
number to a higher setting.
1
At the initial screen or Function Mode Group
screen. The ATL will be displayed by pressing
the ATL lever to the left or right. If the ATL lever is
not operated for 5 seconds the screen will return
to the initial screen.
If a SYSTEM MODE screen is displayed the ATL position will not be
displayed.
2
Adjust the brake side servo travel by moving the
ATL lever to left or right.

Throttle ATL

ATL Lever
Setting range: 0~ 120
(The maximum setting is the
travel set at the throttle brake
side)