Reference; Ratings; Optional Parts - FUTABA 3PDF Instruction Manual

3PDF
Transmitter: T3PDF
(Wheel Type 3 Channel)
Transmitting Frequency:
27, 29, 40, 41, or 75mhz band.
Modulation: FM (Frequency Modulation)
Power Requirement:
12 Volts (8 AA size batteries) or 9.6 Volt Nicad.
(Optional Nicad Battery) NT-8JY
Current Drain: 230ma Maximum
Frequencies allocated for surface in USA by F.C.C.
27mhz Channels 1-6
75mhz Channels 61-90
Servo S3003
(Standard Servo)
Power Requirement: 4.8 Volts or 6 Volts (Shared
with receiver)
Current Drain: ma (Stopped)
Output Torque: 42.0 oz/in
Operating Speed: 0.22sec./60
Size: 0.77" x 1.59" x 1.41"
Weight: 1.5oz.
The following parts are sold separately as optional parts. Refer to the Futaba catalog
for more information.
Futaba Crystal Sets:
FM 27MHz Band crystal
FM 75MHz Band crystal
(FM single conversion sets only)
There are two types of FM crys-
tals. Dual and Single Conversion.
( Use single conversion with this
system.)
Frequency Flag:
Please specify the frequency used

Reference

Ratings

* Specifications and ratings are subject to change without prior notice.
Receiver R113F
(CH 3 FM Receiver)
Receiving frequency:
27, 29, 40, 41, or 75mhz band.
Intermediate Frequency: 455khz
Power Requirement:
4.8 Volts or 6 Volts (Shared with servo)
Current Drain: 16mA
Size: 1.13" x 1.69" x 0.63"
Weight: 0.72 Oz.
FET Amp MC210CB
(FET Amp with Reverse)
Voltage Drop: Approx. 0.52V/20A (Between amp
input and output)
Maximum Current: 20A (Fuse capacity)
Power Requirement: 7.2 ~ 8.4 Volts
Regulator Output: 6V/3A (Maximum)
Size: 1.79" x 1.63" x 1.02"
(Excluding heat sinks and protruding parts)
Weight: 2.55oz

Optional Parts

Transmitter Nicad Battery:
NT-8JY Nicad battery Pack
Body Rest:
Body Rest for 3PDF
Colored Steering Wheels:
available in Red Blue and Green
Colored Grips:
available in Red Blue and Green
A smaller size grip