Servo Reverse - FUTABA 3PDF Instruction Manual

This function will reverse the rotation direction of the
Steering, Throttle and Channel 3 servos.
If the trim position is not set to 0. The servo will
shift the same amount off neutral on the opposite
side when the servo is reversed.
1
Access the SYSTEM MODE by pressing the SE-
LECT and MODE Keys simultaneously
2
Access the Servo Reversing Function screen by
pressing the MODE KEY Once.
3
Select the channel you wish to change by press-
ing the SELECT KEY.
ST: Steering
TH: Throttle
CH3: Channel 3
(Direction Setting)
4
Change the rotation direction with the + or - key.
NOR: Forward Direction
REVE: Reverse Direction
Channel 3 Operation
When CH3 (operation function selection) is set to 1P-4P,
the lever direction versus position movement can be
changed.

Servo Reverse

SELECT
MODE
MODE
SELECT
1:
Initial Screen
10.5V
Select key
SELECT
pressed first
MODE
SYSTEM
MODE
MODE
REVERSE
MODE
MDL.NAME
MODE
AUX.SEL
MODE
GD.SELCT
MODE
System Mode
Group