Steering D/R - FUTABA 3PDF Instruction Manual

(Description when D/R lever is assigned to GDA )
This function is used to limit the steering servo travel.
This feature will limit the servo travel equallyin both
directions. If the car tends to understeer (push) when
cornering add servo travel. If the car tends to over-
steer (loose) take servo travel out.
1
At the initial screen or a Function Mode Group
screen . The D/R position will be displayed by
pressing the D/R lever to the left or right. If the
lever is not operated for 5 seconds the display
will return to the initial screen.
When a SYSTEM MODE GROUP screen is displayed the D/R position
will not be displayed.
2
Adjust the steering servo travel by pressing the
D/R lever to the left or right.

Steering D/R

D/R Lever
Setting Range: 0~120
(The maximum travel can also be
limited by the ATV function)