Creating A New Xpressive Cross-Stitch Design - ELNA XPRESSIVE 2 User Manual

You will see each new color appear in
the color palette.
14 Click Next.
You will see the Autodigitizer Wizard-
Vectorize window.
15 To adjust the color tolerance, adjust the
slider.
16 Click Update Outlines to update the
outlines on the image if you change the
tolerance. You also have the ability to
include the background color in the
resulting design file.
17 Select Fill background color area with
stitches, to fill the background color area
of your image with stitches. To change
the background color, click on the image
and the color will show in the box beside
the instruction.
18 Click Next.
You will see the Autodigitizer Wizard-
Judgment window. This window allows you
to change the settings that will be applied
to the stitches.
19 Select a recipe (style) to apply the proper
settings to the fabric.
20 In the Sequence Order area, select any of
the following settings to adjust the sewing
sequence:
Minimize jump.
Minimize color change.
21 In the Trims area, select any of the
following trim settings:
Never.
Always.
Trim at. The system will place a trim if
the distance between stitches is
longer than the distance displayed in
the Trim At box.
22 In the Lock Stitch area, select any of the
following lock stitch settings:
Never.
Always.
Around trim.
23 Click Finish to autodigitize the design and
view the design file in the design
workspace.
Creating a New
Xpressive Cross-
Stitch Design
Xpressive allows you to work with most well
known machine file formats, reprocess cross-
stitch images automatically, and then sew
these images on your embroidery machine.
The Cross-Stitch Wizard makes creating a
new cross-stitch design easy. To begin the
process, start the Cross-Stitch Wizard, enter
necessary information about the cross-stitch
design you want to create, and follow the
subsequent prompts until you finish creating
your design.
ELNA XPRESSIVE II 169
User's Guide