Viewing The Actual Size Of Designs; Viewing The Whole Design On-Screen - ELNA XPRESSIVE 2 User Manual

To view a design in 3D View:
1 Open the design.
2 Select View—3D View.
You see the 3D View's Option dialog box.
3 Adjust the Display and Light Source
options appropriately.
See "Setting 3D View options" for more
information on setting Display and Light
Source options.
4 Click OK.
You see the design appear in 3D view.
To view 3D stitches in Enhanced Main
View:
1 Open the design.
2 Click the Show 3-D Stitches
the active window.
3 Click the Show 3-D Stitches
again to remove 3D stitches.
Viewing a design in Sequence View:
1 Open the design.
2 Select View—Sequence View.
You will see the Sequence View dialog
appear.
3 Select one of the views available.
4 To hide artwork segments in the
Sequence View dialog and on your
design workspace, click Hide Artwork
.
Viewing the actual size of
designs
Click the Back to 1:1
design appear within its true measurements
where 1 centimeter equals 1 centimeter on-
screen. The rulers change to match the
number of centimeters or inches that the
design measures. Back to 1:1 is useful when
you have used Zoom and want to go back
and view the design based on its
measurements.
You can also press 1 on your keyboard
to go back to the original design size.
To use the Back to 1:1 tool:
• In the View toolbar, click the Back to 1:1
tool to go back to the original design
size.
tool in
Viewing the whole design
tool
on-screen
Fit to Window allows you to view your whole
design in the active window, as well as any
loaded images. For example, after using
Zoom to examine different parts of your
design, you may want to see the design as a
whole before you close it or send it to the
machine.
You can also press W on your keyboard
to view your whole design on-screen.
To use the Fit to Window tool:
• In the View toolbar, click the Fit to Window
tool to view your whole design on-
screen.
ELNA XPRESSIVE II
User's Guide
tool to have the
49