ELNA XPRESSIVE 2 User Manual page 211

Hoop Burn
Hooping Board
I Test
Interlock Stitch
Jacquard
Jump Stitch
Lasso Select tool
Permanent marks that remain on a fabric after the embroidery hoop
has been removed. Unlike, hoop marks, hoop burn cannot be
removed. It is the result of crushed fibers caused by a hoop that is
too tight.
Device that aids in hooping garments or items for embroidery, for
hooping multi-layered items and for uniformly hooping multiple
items.
A thread tension test in which one 1 inch capital letter I is stitched
out in each of the color threads available on the machine, after which
all I's are compared for consistent and correct tension.
Two or more rows of overlapping satin stitches. The point of
overlapping can be straight or curved. Also known as thread
blending or random stitch.
Joseph M. Jacquard invented the Jacquard loom, which used a
punch card to instruct the loom to weave a pattern in color. This
process was later applied to punching 64mm jacquard for automated
embroidery machines.
Movement of the pantograph without needle penetration, commonly
used to get from one point in a design to another.
The Lasso Select tool is located on the Edit toolbar and in the Edit
menu. Lasso Select allows you to select outline segments in a
design by forming a polygon shape around them. Once you select
one or more segments, you can edit them by using the shortcut
menu commands. You can also change the segment properties by
selecting Properties from the shortcut menu.
ELNA XPRESSIVE II 209
User's Guide