Inserting A Stitch - ELNA XPRESSIVE 2 User Manual

114
Normal changes the stitch to a
standard stitch.
Tension0 sets the thread tension.
Tension1 sets the thread tension.
Tension2 sets the thread tension.
Trim inserts a trim at the selected
stitch.
Jump inserts a jump stitch at the
selected stitch, instead of dropping
the needle when the design is sewn
out.
Stop inserts a machine stop at the
selected stitch. A stop can also
represent a color change.

Inserting a stitch

You can insert one or more stitches into a
design file.
To insert a stitch:
1 Open a Xpressive Unified File (*.ESX) or
any other design file.
To undo the stitches you added, press
BACKSPACE
2 Select the stitch that will have stitches
inserted before or after.
For more information, see "Selecting
stitches in various ways".
The stitch becomes highlighted.
3 Press Ctrl+E on your keyboard and
choose one of the following:
Choose Insert Stitch—Before to insert
the stitch before the highlighted stitch.
Choose Insert Stitch—After to insert
the stitch before the highlighted stitch.
on your keyboard.