ELNA XPRESSIVE 2 User Manual page 79

You can easily edit individual characters in
lettering. You no longer have to convert
lettering into segments in order to perform
character edits.
You can open and work with lettering
segments saved in older design file
formats. To save character edits made in
the latest version of Xpressive, you must
save the design file in *.ESX format.
To resize lettering manually:
1 Create your lettering.
2 Select the center bead of the character
you want to edit.
You see an editing box appear around the
selected character.
3 You can now resize the selected
character in one of the following ways:
To
Resize the width of a
character
Resize the height of a
character
Resize the width and
height of a character
simultaneously
4 To resize another character in the
lettering segment, select the center bead
of the character and use the editing box
to resize.
5 When you are finished resizing a
character, click its center bead again.
The editing box will disappear.
ELNA XPRESSIVE II
User's Guide
Do this
At the right side of the
editing box, drag the
middle squared bead.
At the top of the editing
box, drag the middle
squared bead.
At the top of the editing
box, drag the right
squared bead.
77