Resequencing By Color - ELNA XPRESSIVE 2 User Manual

136

Resequencing by color

You can sequence design segments by color.
When you use the Resequence by Color
command, the segments of the design are
reordered according to their thread number.
In other words, the system reorders the
segments so that all Thread 1 segments
come first, then Thread 2 segments, and so
on. Segments using the same needle remain
in the same relative order. Resequence by
Color is useful if you have digitized your
design in a random order and want to stitch
each thread color in order.
To use Resequence by Color:
• Choose Edit—Resequence—Resequence
by Color.
You see a dialog appear. Click Yes to
resequence your design by color.