Deleting Stitches - ELNA XPRESSIVE 2 User Manual

Click a stitch at the start of your
selection. Press Shift on your
keyboard while you click the stitch at
the end of your selection. To extend
the range of selected stitches, press
Shift again or Shift+CTRL while you
click any stitch outside the range of
stitches already selected.
Click a stitch. Press CTRL on your
keyboard while you click each stitch
not already selected.
Selected Stitches are highlighted in black.
4 To edit or change the properties of the
stitches, press Ctrl+E on your keyboard
and choose the settings you want to alter
from the menu.
To select stitches using the Lasso Stitch
Select tool:
1 In the Stitch Edit toolbar, click the Stitch
Select tool.
2 In the Stitch Edit toolbar, click the Lasso
Stitch Select tool.
3 Click the design workspace to place
anchor points in your design.
4 Place anchor points around the segments
you want to select.
5 Right-click to complete your selection.
6 In the Stitch Edit toolbar, click the Stitch
Select tool again
The selected stitches are highlighted in
black.
7 To edit or change the properties of the
stitches, press Ctrl+E on your keyboard
and choose the settings you want to alter
from the menu.

Deleting stitches

You can delete stitches in a design file in a
number of ways: use the Delete Stitch
tool or Backspace on your keyboard to delete
single stitches.
To delete stitches using the Delete
Stitch tool:
1 Open a Xpressive Unified File (*.ESX) file
or any other design file.
2 Click the Zoom
see the stitch you want to delete.
For more information, see "Magnifying
and reducing the view".
3 In the Stitch Edit toolbar, click the Stitch
Select tool.
4 Select the stitch you want to delete.
ELNA XPRESSIVE II
User's Guide
tool to zoom in and
99