HP Ew2400 - JetDirect Print Server Administrator's Manual page 39

arp and ping commands. (For print servers configure with
Legacy default IP address 192.0.0.192 only) You can use the arp
and ping commands from your system. For more information,
see "Using the arp and ping Commands".
Telnet. You can set configuration parameters using Telnet. In
order to set configuration parameters, set up a Telnet
connection from your system to the HP Jetdirect print server
using the default IP address. Once configured, the print server
saves the configuration when powered off/on. For more
information, see "Using Telnet".
Embedded Web server. You can browse to the embedded Web
server on the HP Jetdirect print server to set configuration
parameters. For more information, see Chapter 4.
Printer Control Panel. (HP Jetdirect 620n print servers only)
You can manually enter the configuration data using the printer
control panel keys. The control panel method allows you to
configure only a limited subset of configuration parameters.
Therefore, control panel configuration is recommended only
during troubleshooting or for simple installations. If control
panel configuration is used, the print server saves the
configuration when powered off/on. For more information, see
"Using the Printer Control Panel".
TCP/IP Configuration 39
ENWW