HP Ew2400 - JetDirect Print Server Administrator's Manual page 235

Table 9.11 Error Messages (11 of 11)
Error Code and
Message
86 FOR
MULTILANGUAGES
UPGRADE AGAIN
F1 TRYING TO
CONNECT TO
SERVER
F2 TFTP IN
PROGRESS
F3 BOOTP/RARP IN
PROGRESS
F4 BOOTP/DHCP IN
PROGRESS
ENWW
Description
When upgrading a supported print server that contains a
firmware version prior to X.24.00, it will be necessary to
perform the firmware upgrade again if you want the print
server to support management tools (for example, the
embedded Web server) using non-English languages.
The HP Jetdirect print server is trying to connect to the
NetWare server(s). This is a normal message. Wait until
either the connection is established or another status
message appears.
The print server is attempting to use TFTP to obtain TCP/IP
configuration settings over the network.
The print server is attempting to use BootP or RARP to
obtain TCP/IP configuration settings over the network.
The print server is attempting to use BootP or DHCP to
obtain TCP/IP configuration settings over the network.
HP Jetdirect Configuration Page 235