HP Ew2400 - JetDirect Print Server Administrator's Manual page 30

Verifying Network Configuration
To verify your current network configuration, print a Jetdirect
configuration page. If you have not printed a configuration page
from your printer, see your printer documentation for instructions
(see Chapter 9
panel, make sure a
at least 1 minute, then print the page. The current configuration is
listed under "AppleTalk" on the configuration page.
Note
Renaming the Printer
The factory supplies a default name for your printer.
Hewlett-Packard highly recommends that you rename your
printer to avoid having multiple printers with similar
names on your network.
CAUTION
Note
You can name your printer anything you like—for example,
"Michael's LaserJet 4000." The HP LaserJet Utility has the ability
to rename devices located in different zones, as well as the local zone
(no zones need to be present in order to use the HP LaserJet Utility).
ENWW
for more information). If your printer has a control
message appears on the control panel for
READY
If you have multiple printers on your network, you
need to print a configuration page to identify the
printer's name and zone.
After you have renamed the printer and have set up
print queues to that printer, use caution when
changing the printer name again. If you rename the
printer again, the queues for that printer will no
longer function.
The name may be up to 32 characters in length.
A warning beep indicates that an illegal character
was typed. For illegal characters, see the Help
system integrated with the software.
HP Software Solutions Summary 30