HP Ew2400 - JetDirect Print Server Administrator's Manual page 129

or after the print job. You can define up to eight named strings, and
you can set up each queue so that any of these named strings
precedes the print data ("prepend string name") or follows the print
data ("append string name").
LPD Queue Parameters for setting up LPD queues are described
below. See Table
Table 4.9 LPD Queue Parameters (1 of 3)
Item
Queue Name
Prepend String
Name
Append String
Name
ENWW
4.9.
Description
Name of the user-defined queue. This name can be up to 32
characters long, and can consist of any displayable ASCII
characters. You can define up to six user-defined queues.
Enter the name of one or more strings to be added before (or
prepended to) the print data. You specify string names and
values in the table at the bottom of the page.
To prepend a long string, multiple string names may be
concatenated, that is, entered and separated by a "+" character.
For example, to prepend a long string that has been divided into
two separate strings, enter:
<stringname1>+<stringname2>
where stringname1 and stringname2 are specified as two
separate string names with different values.
Enter the name of one or more strings to be added after (or
appended to) the print data. You specify string names and values
in the table at the bottom of the page.
To append a long string, multiple string names may be
concatenated, that is, entered and separated by a "+" character.
For example, to append a long string that has been divided into
two separate strings, enter:
<stringname1>+<stringname2>
where stringname1 and stringname2 are specified as two
separate string names with different values.
Using the Embedded Web Server 129